Drachten, The Netherlands
A few circles over Appingedam, a town in The Netherlands to produce a high res 3D model.
Two circle ‘lines’ over Drachten to produce an XCAM 3D model.
Capture
| Camera Model Aircraft Date Flown Plan Type Plan Resolution Plan Overlap Plan Flying Height Survey Duration Images Captured Area Covered Calculated SQKM/Hour Actual Ortho GSD |
XCAM B (RGB/RGB) Cessna F172 27th June 2017 WaldoAir Circular Path 3cm n/a (Circular Path) 1,100 FT AGL 11m 07s 370 2.30 square kilometres 12.41 2.8cm |
Processing
This circular project was processed in Skyline Photomesh using 5 networked computers (Intel i7 4785T, 16GB RAM, 460GB SSD). They were ‘fused’ together to do the Photo Preparation, Aerotriangulation, Tile Build and Product Output. Ground Control Points (GCPs) were used as they were available for this project area.
| Photo Preparation Aerotriangulation (AT) Tile Build (Point Cloud & Mesh) Product Output |
0h 31m 01s 2h 22m 01s 42h 15m 47s 0h 24m 18s |
Product Showcase
Data Download
- Raw Data (Click here to download)
- Orthophoto (ECW Format) (Click here to download)
- 3D Viewer Kit (Skyline TerraExplorer) (Click here to download)
Credits
Data captured by Kavel10. Data can be used for demonstration and evaluation purposes only. Raw or derived data not to be sold.